This post shows you the best place to troubleshoot an oven light problem on Dacor CPS and CPD ovens. Remember, any time you are taking measurement inside an oven, there is a potential for electrical shock. This is very dangerous!!! So double check you have power off to the oven. If you don’t know how to use a voltmeter, find somebody who does or call an tech and show them this blog. Never do this alone. Not trying to scare you from doing something productive, but safety first!
Oh yea, this post assumes you have checked/replaced the bulb 🙂
The picture below shows you how to determine whether your Dacor has a problem with the touchpad or the electronic control board. Depending on the results, you will have to contact us (firstname.lastname@example.org) or a rebuild company like this (click here).
If resistance is not dropping below 200ohms when you press the button, contact us at email@example.com. If it is, and you know the bulb is ok, the circuit board is the likely the culprit and can be rebuilt by following this link.
A list of model number with this type of light circuit includes but is not limited to: CPS227 CPS227A CPS227B CPS227W CPD227 CPS230 CPS230B CPD230 CPS127 CPS127A CPS127S CPS127W CPS130 CPS130A CPS130B CPS130R CPS130S CPS130W CPS230W CPS230S CPS230A
The relay/power board in the picture above can have these part numbers. 82811,82812,82810,82832,92028, 92029, 62439, 82985.
May your future be bright!