Failed Dacor Touchpad Causing F1 or F7? CPD,CPS Built-In Ovens

Are you having trouble finding a keypad for your Dacor built in oven? Don’t worry, there are options!  For a fraction of an oven replacement you can have the functionality restored to your oven and avoid multiple thousands of dollars to replace a built-in oven. A simple keypad problem can turn into a headache due to a ‘no longer available’ (NLA) or obsolete touchpad. Most parts for Dacor ovens are available for a very long time but the touch pad seems to be an exception to this. This control panel is made of a sealed membrane switch that wears out over time. Once this part fails, the oven can become unresponsive, beep randomly or throw error codes like F1 and F7 codes.

***** Update – New Recommended Solution  *****
We now recommend a wireless tablet solution.  You can get it from Applianceboards by emailing info@applianceboards.com.  Buy directly from BoardFruit.com, or from this Amazon link.

522a1468

Recommended solution for Obsolete Dacor Panels

Here is what our customers are saying:
“Success! Working great, looks great and on top of that saved us thousands compared to a new Dacor. Thank You” – Clayton – Dallas, Texas

“Our Dacor is working great again. See attached picture of our dinner” – Frank – Dallas, Texas
(FYI, it was chicken and it looked tasty!)

“Yeah! Arrived, installed and up to temperature! Thank you. Great instructions – easy install” – John – Downers Grove, Illinois

“We received the keypad and installed it. It works great! Thank you do much! It sure beats buying a new double oven!” – Brad – Bethel, Ohio

 

Dacor Models that are applicable include CPS227 CPS227A CPS227B CPS227W CPD227 CPS230 CPS230B CPD230 CPS127 CPS127A CPS127S CPS127W CPS130 CPS130A CPS130B CPS130R CPS130S CPS130W CPS230W CPS230S CPS230A and others.

Ready to send your panel? Use the Amazon checkout process for “start to finish tracking”. Select you part to go the Amazon product page

13159A – Less than $300 on Amazon
13159B – Less than $300 on Amazon
13159W – Less than $300 on Amazon
13160B – Less than $300 on Amazon
13291B – Less than $300 on Amazon
13292A – Less than $300 on Amazon
13158B – Less than $300 on Amazon
13158S – Less than $300 on Amazon
13158W – Less than $300on Amazon
13290A – Less than $300 on Amazon
13290B – Less than $300 on Amazon
13290R – Less than $300 on Amazon
13290S – Less than $300 on Amazon
13290W – Less than $300 on Amazon
13291W – Less than $300 on Amazon
13291S – Less than $300 on Amazon
13291A – Less than $300 on Amazon
76480B – Less than $300 on Amazon

Don’t see your Dacor part number or model number or have questions? Contact info@applianceboards.com.

Dacor CPO230WO and CP0130C Cooling Fan Problem and F1,F2,F3,F4 error codes

At www.FixYourBoard.com, we see controllers come in for Dacor model numbers CPO230W, CP0130C.  These models use the following control boards control that can be rebuild quickly and reliably – 82810, 82812, 82811, 82837, 82875, 82874.

The most common symptoms for these boards are F1,F2,F3,F4,F5,F6 error codes.  Sometimes they throw F6 codes.

For these models, when the cooling fan does not operate, it is not due to the control boards.   The following diagram illustrates this.  The red line annotates how the fan is turned on using the DLB relays to supply L1 to the fan through the thermal switch.  This means that if the oven is heating, the DLB is working and the problem must be with the thermal switch or cooling blower itself.  Note that when the cooling fan does not work, the oven can have a difficult time controlling temperature.  It is not uncommon for the oven to burn the top of the food while baking if the fan is not working properly.Dacor  Wiring Diagram for CP0230

Send Dacor ERD, ERSD, CPS Control Boards For Repair

Dacor ovens have control boards that can be refurbished to extend the life of your oven.  The models include but are not limited to ERD30, ERSD30, ERG30, ERD36, ERDS36, ERG36, ERD48, ERDS48, ERD30S06, CPS227, CPD227, CPS230, CPD230, CPS127, CPS130, PGR30S.   Common errors include beeping F0, F1, F2, F3, F4, F5, F6 and E0 errors, blank displays and oven not reaching temperature.  These errors can be fixed  quickly and reliably at www.fixyourboard.com.  Along with the failed component, all other components prone to failure are also replaced.  This means many more years of worry-free oven operation after a control board rebuild.

Once it is suspected that the oven has a control board problem, it usually makes sense to remove all of the control boards to be inspected and repaired.  This page will show you the location of these boards.  As always, make sure all power to the oven is turned off and take pictures or notes to facilitate the re-installation process.

If you have a single oven there is one “display board” and the other a “relay board”.  If you have a double oven, there is one display board and two relay boards.  By far, the majority of problems are due to the display control board, but if you suspect an issue with the relay board, it can be tested/rebuilt too.

Common part numbers for the display board are: 701002, 701003, 701004, 701005, 701006, 701007, 62180, 62181, 62182 ,62151, 62789, 62790, 62692, 62681, 82381, 82382, 82758.

These look similar to this:

The location of the display board can be seen in the following diagram:

The relays board/s will look similar to:

The relay boards can be found using the following diagram:

Once you have your notes/pictures for reference.  Remove the control boards, wrap it with some cushioning and put it in a box.  Most control boards will be fixed, tested and returned to your door step within a week.

How to Remove an Oven Control Board

If you own an oven, chances are at some point you will need to access the electronics behind the control panel.  Doing it yourself can save you some money and is easy to do on most ovens.  Regardless of what you may hear, the control boards on all appliances are repairable.  Many times, control board repair is the only option because they are obsolete or no longer available from the manufacturer.  A good example of a repair service company is www.FixYourBoard.com.

This posting shows the basic steps for removing a control board from a built-in electric Whirlpool model .  A similar process applies to Kitchenaid, GE, Thermador, Dacor, Jennair and many others. This process is just as easy on most other oven brands and once you do it, you will be glad you tackled the job.  All you usually need is a screw driver and a refreshing drink.  This post covers the basic steps that one should follow.

1.  Turn Off Power to Oven

This is the single most important step.  This is for your safety and to protect the electronics of the oven.  Removing power ensures that no wires will be shorted to other metal parts.   This is done with the circuit breaker.  Find the right one and make sure it turns off all lights in the oven and control panel.

2.  Remove Mounting Hardware

Front View Screw Locations

Side view of screws holding control panel

This whirlpool has mounting screws for the support brackets on the sides of the oven door.  These can be removed by opening the door and removing the holding screws.

3.  Take Notes and Pictures

Now, the control panel should be loose and you can pull it out to see what is behind the control panel.  This is great time to take some notes and pictures.  This is quick to do and you will glad you did once it is time to re-install the control board.

Behind Front Touchpad

In most cases as in this one, you will see the control board attached to the front panel.  Again, before you remove the control board from the panel or disconnect any wires, it is recommended that you take some snapshots before going any further.

Once the connections are removed and the control board is free, all you have to do is wrap it with some cushioning and put it in a box.  Most control boards will be fixed, tested and returned to your door step within a week.