WB27K5040 Conversion Kit – JTP10 JTP11 JTP13 JTP14 JTP15 Series GE Built-In Double Ovens

A vast majority of the time, no longer available  electronic controllers can be rebuilt to function like new.    In some cases, these obsolete controllers have so much damage that a rebuild is not feasible.   Don’t worry, there is still another option to avoid a costly appliance purchase.  WWW.FixYourBoard.com can modify your front panel to accommodate a new controller!  This blog illustrates the minor wiring modifications that are needed for some common GE controllers.

Parts:  WB27K5040, WB27K5190, WB27K5195, WB27K5123, WB27X5584, WB27K5054, WB27X5572, WB12K005, WB12K006, WB27K5073, WB27X5482

Models: JBP48AY1, JBP48WY1, JBP79AV1, JBP79AV2, JBP79AW1, JBP79AY1, JBP79GV1, JBP79GV2, JBP79GW1, JBP79WS2, JDP36GP3AD, JDP36GP3WH, JDP37GP3BG, JDP39WR1, JDP39WR3WH, JKP13GP1, JKP13GP2BG, JKP13GP3BG, JKP13GP4BG, JKP13GT1BB, JKP13GV1BB, JKP14WP1, JKP14WP2WG, JKP14WP3WG, JKP14WT1WW, JKP14WV1WW, JKP15AV1AA, JKP26GP1, JKP26GP2BG, JKP26GP3BG, JKP26GP4BG, JKP26GV1BB, JKP27WP1, JKP27WP2WG, JKP27WP3WG, JKP27WV1WW, JMP28GR1AD, JMP28GR1WH, JMP29GR1BK, JMP31WR1WH, JMP32AR1AG, JSP69BVBB, JSP69WVWW, JSS26GP2BG, JTP10GP, JTP10GS1BG, JTP10GS2BG, JTP10GS3BG, JTP10GS4BG, JTP11WP, JTP11WS1WG, JTP11WS2WG, JTP11WS3WG, JTP11WS4WG, JTP13GT1BB, JTP13GV1BB, JTP13GV2BB, JTP14WT1WW, JTP14WV1WW, JTP14WV2WW, JTP15BW1BB, JTP15WW1WW, JTP15WW2WW and more

WB27K5040 Conversion Kit – JTP10 JTP11 JTP13 JTP14 JTP15 Series GE Built-In Double Ovens

WB27K5040 Conversion Kit – JTP10 JTP11 JTP13 JTP14 JTP15 Series GE Built-In Double Ovens

Thats it, follow the illustration above and you will be cooking in no time!  Remember www.fixyourboard.com for a all your electronic control board problems.

Repair of IDI-Cybor Control Controllers. 1-139-022, 1-130-020, 1-139-023

GetSpares has IDI-Cyborg parts in stock

This page is dedicated to control boards designed by IDI-Cybor. Their chemical management technology is used primarily in semiconductor processing: specifically in dispensing resist, develop, EBR, low-k, SOG and solvent. If you are having trouble finding these parts or want to save some money, look no further. GetSpares has a cleanroom with working IDI pumps.  This way, you know the parts will be fully functional.

Send Your Controller or Buy One Directly

  • Revive your IDI pump system without having to replace an expensive or no-longer-available (NLA) controller.
  • Quick turn time minimizes downtime.

Guaranteed results

  • Extensive knowledge on IDI-Cybor pump controllers allows for a broad range of thorough trobleshooting and analysis.
  • Root cause identified and other components prone to failure are replaced.

If your board is not listed below

There is a long list of Commercial/Industrial boards that we have repaired but are not on the website. We will be adding to the list below as we develop automation for testing specific part numbers. In the event that your board is not listed, please feel free to contact us at GetSpares with a model/part/serial number and a description of the problem.

Part Details:

Image Part # Description
1-139-022
1-39022REV4
1-139-022FG/7
M300 Control Card FSI Polaris 294017-007
Pump Controller
Pump Controller
1-130-020
1-139-020
PCB, Motherboard Panel Display
M300 Mother-13 FSI Polaris 294018-013
1-139-023
1-139-023FG1-139-030
1-130-023
Integrated Designs FSI 294056-001 PCB-M300
Chemical Interface IDS Comm. PCB AssyIDI 310 Controller
PCB Pump Controller
1-139-028 PCB M400 Sub Assy
1-139-035 PCB assy
1-130-018 Model 20 PCB

 

Jenn-Air ACB, JEW, JJW, MEW, SCE, SVD, and WW Series Built-In Ovens can’t keep time and can’t be calibrated? Solution is here.

We’ve seen a number of Jenn-Air ovens (relevant model/part numbers and photos of typical boards below) here at FixYourBoard.com with the same recurring problem…

The oven control seems unable to consistently keep the time (e.g. the display is often encountered flashing “12:00”), and the user calibration for the oven temperature is not saved after being set.

To set temperature calibration follow these steps:

  • Press “Bake” (upper bake will calibrate the upper oven, and lower bake will calibrate the lower oven)
  • Enter in “500” degrees
  • Hold down “Bake” again (the same bake as pressed at the start)
  • This should enter the calibration menu.  A number ranging from -35 to +35 (by increments of 5) should be displayed.  The default is “0”.
  • Press “Broil” to toggle between positive and negative ranges and then key in the desired offset (can only be from -35 to +35 by increments of 5).
  • Ex) a +20 degree offset will cause the oven controller to display “330” for an oven cavity that is actually 350 degrees.  Similarly, a -25 degree offset will cause the controller to display “425” for a cavity that is actually 400 degrees.
  • Press “Clear/Cancel” or just idle for a few seconds and the offset will be stored and the display will return to showing the clock.  So if you were to re-enter the calibration menu, it should show whatever number you just keyed in.

The control failure being addressed in this post is when you re-enter the calibration menu and it reads “0” or is blank instead of being stored at the desired offset.

Well we’ve discovered what’s causing this problem and know how to fix it.  Furthermore, we will refurbish the entire board, quickly and reliably, replacing all the components prone to failure and back it up with a two year warranty.  And the best part is that this repair is a fraction of the cost of buying a new controller, or worse yet, a new oven.  So send your malfunctioning controller in to FixYourBoard.com and we’ll get it back up and running like new in no time!

Relevant Jenn-Air model numbers:

ACB6260AB ACB6260AS ACB6260AW ACB6280AS

SCE30600B SCE30600BC SCE30600W SCE4320B SCE4320W SCE4340B SCE4340BC SCE70600B SCE70600W SCE30500W

SVD48600B SVD48600PF SVD48600PG SVD48600PK SVD48600PR SVD48600PT

MEW6627BAB MEW6627BAC MEW6627BAQ MEW6627BAS MEW6627BAW MEW6627CAS

JEW8527AAB JEW8527AAW JEW8530AAB JEW8530AAW JEW8627AAB JEW8627AAW JEW8630AAB JEW8630AAW JEW9627AAB JEW9627AAS JEW9627AAW JEW9630AAB JEW9630AAS JEW9630AAW JEW9527AAB JEW9527AAW JEW9530AAB JEW9530AAS JEW9530AAW

JJW8527AAB JJW8530CAB JJW8530CAS JJW8530CAW JJW8630CAB JJW8630CAS JJW8630CAW JJW8527CAB JJW8527CAS JJW8527CAW JJW8627CAB JJW8627CAS JJW8627CAW JJW9527CAB JJW9527CAQ JJW9527CAS JJW9527CAW JJW8530CCB JJW8530CCW JJW9530CCB JJW9530CCS JJW9530CCW JJW9630CCB JJW9630CCS JJW9630CCW

WW30430W WW27430B WW27430BC WW27430P WW27430PF WW27430PG WW27430PK WW27430PR WW27430PU WW27430W WW27430WC WW30430B WW30430P WW30430PC WW30430PF WW30430PG WW30430PK WW30430PR WW30430PU

Relevant Jenn-Air part numbers:

12001691 12001693 12001914 71001799 71001872 71001977 71002594 71003401 71003424 74006612 74006613 74006614

71001799

Single oven display - front

71001799

Single oven diplsay - rear

Double oven display - front

Double oven display - rear

Single/upper oven relay board


Lower oven relay board

Whirlpool RM278, RM288 series with common failures (Blanking display, F1, F2 and F3 errors, random resetting and beeping)

3148270, 3148271, 3148272, 3148273, 3148274, 3148275 are common control boards that have been showing up at www.FixYourBoard.com.   They fit into the following model numbers:  RM288PXS0, RM288PXV4, RM288PXV5,  RM288PXV6,  RM288PXV7,  RM278BXS0,  RM278BXV0,  RM278BXV2,  RM278BXV4,  RM278BXV5, RM278BXV6 ,RM278BXV7.  There are slight variations in color and functionality, but they are similar to the following:

The common failures are blanking display, random clock resets, F1, F2, F2 errors, and beeping/chirping noises.    No worries, all these symptoms can be repaired.  There is no reason to buy new as the warranty on refurbished timers is longer that a new.  Contact www.fixyourboard.com for more information.

Dacor CPO230WO and CP0130C Cooling Fan Problem and F1,F2,F3,F4 error codes

At www.FixYourBoard.com, we see controllers come in for Dacor model numbers CPO230W, CP0130C.  These models use the following control boards control that can be rebuild quickly and reliably – 82810, 82812, 82811, 82837, 82875, 82874.

The most common symptoms for these boards are F1,F2,F3,F4,F5,F6 error codes.  Sometimes they throw F6 codes.

For these models, when the cooling fan does not operate, it is not due to the control boards.   The following diagram illustrates this.  The red line annotates how the fan is turned on using the DLB relays to supply L1 to the fan through the thermal switch.  This means that if the oven is heating, the DLB is working and the problem must be with the thermal switch or cooling blower itself.  Note that when the cooling fan does not work, the oven can have a difficult time controlling temperature.  It is not uncommon for the oven to burn the top of the food while baking if the fan is not working properly.Dacor  Wiring Diagram for CP0230

Thermador Built-In Oven – Takes Too Long to Heat, Can’t Control Temperature, No Heat

Does your Thermador oven have temperature control problems caused by the control board?  The following post describes the behavior of a properly working control board in pre-heat.  This applies to the following model series: SCD27,  SCD30,  SCE30,  SCE70,  SC272,  SC301,  SC302,  SMWS7,  SMW27,  SM272,  SVD48,  S272T,  S301T and  S302T.  At www.FixYourBoard.com, we hear about problems such as the oven taking too long to heat, temperature fluctuations in the oven, oven is burning food or there is no heat at all.

First, the picture below shows the relevant connections  that should be measured to ensure that the elements are correctly turned on by the relays.  This picture is an example of part 492067 which is the power / relay board.  Its purpose is to provide power to the oven, turn on heating elements and fans, and communicate with the display board.

thermador_relay_power_board controller

Relay Board and Noted Measurement Points

These ovens can be tricky to troubleshoot, but start with the following table which shows how the timer is controlling the heating elements and cooling fans.  Note that an AC voltmeter must be used to perform the following checks

Thermador Pre-Heat Cycling

Pre-Heat ModeBake to L2 Broil 1 to L2Broil 2 to L2DLB relayCooling Fan Relay
Bake ModeOn 50 sec = 0VAC
Off 10 sec = 240VAC
Off 50 sec = 240VAC
On 5 sec = 0VAC
Always off = 240VACAlways on = 0VACAlways on = 0VAC
Convection
Roast
Always off = 240VACOn 30 sec = 0VAC
Off 30 sec = 240VAC
On 30 sec = 0VAC
Off 30 sec = 240VAC
Always on = 0VACAlways on = 0VAC
Convection Bake ModeAlways off = 240VACAlways off = 240VACAlways on = 0VACAlways on = 0VACAlways on = 0VAC
Broil ModeAlways off = 240VACAlways on = 0VACAlways off = 240VACAlways on = 0VACAlways on = 0VAC

Relevant model numbers:  1065923121 , 1065923160 , 1065923161 , 1065923200 , 1066025120 , 1066025150 , 1066025151 , 1066025160 , 1066025201 , SCD272T , SCD302T , SCE30500W , SCE30600B , SCE70600B , SCE70600W , SC272T , SC301T , SC302T , SMWS72YP AFTER S/N 8204 , SMW272B , SMW272P , SMW272S , SMW272W , SMW272YB AFTER S/N 8204 , SMW272YS AFTER S/N 8204 , SMW272YW AFTER S/N 8204 , SMW272ZS AFTER S/N 8204 , SM272B , SM272S , SM272W , SM272YB AFTER S/N 8204 , SM272YS AFTER S/N 8204 , SM272YW AFTER S/N 8204 , SM272ZS AFTER S/N 8204 , SVD48600B , SVD48600PF , SVD48600PG , SVD48600PK , SVD48600PR , SVD48600PT , S272T , S301T , S302T

Relevant part numbers: 35-00-760, 12001691, 492071, 14-38-901, 492069, 492067

GE Double Built-in Oven – Install Problem After Rebuild. F2 Error and Oven Stays at 100 degrees

So you just got your GE control board refurbished from www.FixYourBoard.com and the controller appears to be doing strange things.  How can this be?  They have a 100% functional test for every outgoing board they rebuild.  Well, there is a good change that there may be an installation wiring problem.  This page describes a common hook up problem that fortunately is easy to correct and causes no permanent damage.  A partial list of model series that this applies to is: 3634842 9114842 JKP44GP JKP44GT JKP44GV JKP45WP JKP45WT JKP45WV JKP54GP JKP54GT JKP54GV JKP55WP JKP55WT JKP55WV JKP56AS JKP56AT JKP56AV ZEK754G ZEK755W ZEK756G ZEK757W.

The solution applies to most built in GE ovens, but the wire coloring may be different for some models.  Make sure you check your wiring diagram that is specific to your model number.

Symptom: F2 errors, oven display stays at 100 degrees, uneven cooking.

Description:  You turn on the upper oven and set the temperature.  The left orange numbers on the display light up and show the set temperature.  After about a minute the left temperature shows 100 degrees and stays there.  You check the upper oven, but it is not getting hot.  The lower oven starts to warm up.  If you set the lower oven, the exact opposite scenario exists.

Cause:

When the upper oven is set, the control board turns on power to the elements and measures the temperature in the upper oven.  The problem is that if the orange wire is connected to DLB2 instead of DLB1  and the yellow is connected to BA2 instead of BA1, the lower oven will begin to heat instead of the upper oven.  In short, the wiring is wrong and needs to match the wiring diagram.  Here is an example that covers most built-in GE ovens:

Upper Bake(BA1) – Yellow                        Lower Bake(BA2) – Yellow/White

Upper Broil(BR1) – Violet                          Lower Broil(BR2) – Violet/White

Upper DLB(DLB1) – Orange                     Lower DLB(DLB2) – Orange/White

A complete list of models is: 3634842594, 9114842593, 9114842594, 9114842993, JKP44GP1, JKP44GP2BG, JKP44GP3BG, JKP44GP4BG, JKP44GT1BB, JKP44GT2BB, JKP44GV1BB, JKP45WP1, JKP45WP2WG, JKP45WP3WG, JKP45WT1WW, JKP45WT2WW, JKP45WV1WW, JKP54GP1BG, JKP54GP2BG, JKP54GP3BG, JKP54GP4BG, JKP54GT1BB, JKP54GT2BB, JKP54GV1BB, JKP55WP1WG, JKP55WP2WG, JKP55WP3WG, JKP55WT1WW, JKP55WT2WW, JKP55WV1WW, JKP56AS1AA, JKP56AT1AA, JKP56AT2AA, JKP56AV1AA, ZEK754GP1, ZEK754GP2BG, ZEK754GP3BG, ZEK754GP4BG, ZEK754GP5BG, ZEK754GP6BG, ZEK754GP7BG, ZEK755WP1, ZEK755WP2WG, ZEK755WP3WG, ZEK755WP4WG, ZEK755WP5WG, ZEK755WP6WG, ZEK756GP2BG, ZEK756GP3BG, ZEK756GP4BG, ZEK756GP5BG, ZEK756GP6BG, ZEK756GP7BG, ZEK757WP1WG, ZEK757WP2WG, ZEK757WP3WG, ZEK757WP4WG, ZEK757WP5WG, ZEK757WP6WG, and more

Send Dacor ERD, ERSD, CPS Control Boards For Repair

Dacor ovens have control boards that can be refurbished to extend the life of your oven.  The models include but are not limited to ERD30, ERSD30, ERG30, ERD36, ERDS36, ERG36, ERD48, ERDS48, ERD30S06, CPS227, CPD227, CPS230, CPD230, CPS127, CPS130, PGR30S.   Common errors include beeping F0, F1, F2, F3, F4, F5, F6 and E0 errors, blank displays and oven not reaching temperature.  These errors can be fixed  quickly and reliably at www.fixyourboard.com.  Along with the failed component, all other components prone to failure are also replaced.  This means many more years of worry-free oven operation after a control board rebuild.

Once it is suspected that the oven has a control board problem, it usually makes sense to remove all of the control boards to be inspected and repaired.  This page will show you the location of these boards.  As always, make sure all power to the oven is turned off and take pictures or notes to facilitate the re-installation process.

If you have a single oven there is one “display board” and the other a “relay board”.  If you have a double oven, there is one display board and two relay boards.  By far, the majority of problems are due to the display control board, but if you suspect an issue with the relay board, it can be tested/rebuilt too.

Common part numbers for the display board are: 701002, 701003, 701004, 701005, 701006, 701007, 62180, 62181, 62182 ,62151, 62789, 62790, 62692, 62681, 82381, 82382, 82758.

These look similar to this:

The location of the display board can be seen in the following diagram:

The relays board/s will look similar to:

The relay boards can be found using the following diagram:

Once you have your notes/pictures for reference.  Remove the control boards, wrap it with some cushioning and put it in a box.  Most control boards will be fixed, tested and returned to your door step within a week.

How to Remove an Oven Control Board

If you own an oven, chances are at some point you will need to access the electronics behind the control panel.  Doing it yourself can save you some money and is easy to do on most ovens.  Regardless of what you may hear, the control boards on all appliances are repairable.  Many times, control board repair is the only option because they are obsolete or no longer available from the manufacturer.  A good example of a repair service company is www.FixYourBoard.com.

This posting shows the basic steps for removing a control board from a built-in electric Whirlpool model .  A similar process applies to Kitchenaid, GE, Thermador, Dacor, Jennair and many others. This process is just as easy on most other oven brands and once you do it, you will be glad you tackled the job.  All you usually need is a screw driver and a refreshing drink.  This post covers the basic steps that one should follow.

1.  Turn Off Power to Oven

This is the single most important step.  This is for your safety and to protect the electronics of the oven.  Removing power ensures that no wires will be shorted to other metal parts.   This is done with the circuit breaker.  Find the right one and make sure it turns off all lights in the oven and control panel.

2.  Remove Mounting Hardware

Front View Screw Locations

Side view of screws holding control panel

This whirlpool has mounting screws for the support brackets on the sides of the oven door.  These can be removed by opening the door and removing the holding screws.

3.  Take Notes and Pictures

Now, the control panel should be loose and you can pull it out to see what is behind the control panel.  This is great time to take some notes and pictures.  This is quick to do and you will glad you did once it is time to re-install the control board.

Behind Front Touchpad

In most cases as in this one, you will see the control board attached to the front panel.  Again, before you remove the control board from the panel or disconnect any wires, it is recommended that you take some snapshots before going any further.

Once the connections are removed and the control board is free, all you have to do is wrap it with some cushioning and put it in a box.  Most control boards will be fixed, tested and returned to your door step within a week.